Quick Guide Manual
Garden Version
Ver.: 180321
GrowWall2G
Wall Garden
D3. Growing Stage
1. When young plants grow to 3-4 inches height, switch control box to growing mode.
Please refer to chart II
2. After 4-6 weeks, harvest the larger plants for consumption and keep smaller plants growing.
3. For time saving, sow the new seeds in sprout tray one week before you start next planting process
D. Seedling
4-6 weeks
Harvest
Cut off Large leaf
1 week
Keep
for regrow
D2.Young plant stage
1. In each sponge, keep the strongest and thicker one and remove others.
2. Add 10.5 gallons water to the water tank.
3. During young plant stage (around 2 inches), turn on LED and Pump . Please refer to the ChartII.
4. Add NT-Starter into the water tank and ensure EC value between(=1.0-2.0mS/cm)
Status
NT-Adjuster
0.0-0.5
(Add 2pcs)
0.5-1.0
(Add 1pcs)
1.0-1.5
Standard range
over 2.0
Add water
Plant Size
Sponge Number
Planting number
How to Set up x 3 Layer
Small
70
48 (70%)
5. Ensure pH between 5.5-6.5 (adjust by pH+/-). For EC& pH adjustment instruction, please refer to
planting Q&A from OPCOM webstie.
Satus
pH+ Adjuster
pH- Adjuster
4.0-4.5
(Add 3pcs)
4.5-5.0
(Add 2pcs)
5.0-5.5
(Add 1pcs)
5.5-6.5
Standard range
Standard range
6.5-7.0
1pcs
7.0-7.5
2pcs
Plant Size
Sponge Number
Planting number
How to Set up x 3 Layer
Medium-Large
40
24 (70%)
E. Sprouts and Microgreens.
1. Before you start next seedling, take advantage of the seedling tray for sprouts and microgreens it takes 7-10 days to harvest.
2. Put seeds in warm water(recommeded temperature is 35 , not over 40 ) for 24 hours.
3. Cover the sponges with wet paper towels.
4. Place the seedling tray with cover in the shade or cover it with black cloth.
5. After germination, during the growing stage, keep green sprout under the light and white sprout in the shade or cover it
with black cloth; Around 7-10 days, you can harvest.
Day 7-10
Green sprout
Day 0
Day 1
White sprout
H. Q&A
F. Maintenance
G. Troubleshooting
Checkpoints / Solution
Make sure all power cables are connected.
Power button is ON.
Make sure LED status is ON
If it is on HI or LOW mode, the lamp has off time, during 24-hour cycle.
Control Box is designed with Auto, HI and LOW modes, which turn the lamps and the pump on and off
periodically. It simulates an outdoor daily cycle to offer the best growing condition
Rotate the ring at the end of the pump clockwise or counterclockwise to get the most suitable water flow
Make sure it is not clogged at the water flowing gateway on each planting layer
Issue
Lamps not
lighting up
The lamp/ pump
stop after hours
Water Over flows
Answer
During the delivery in vessels, aircraft, or other vehicles, it may lead to damages in GrowWall(OFG003)/GrowWall2(OFG003-2)
and creates leaking problem. OPCOM FARM provides waterproof tape for you fix it in case damage happened.
Question
Product leakage When it works.
F1. Add Water
1. Measure the PH/EC value every 1-2 weeks and add water to maintain the vlaue balance
F2. Change Water
1. After a cycle of planting, change the water and clean the unit
2 When change water, clean water gateway on each planting layers, you may also add moss detergent in the water tank to avoid the moss remaining
3. On the regular basis of every 1-2 weeks, clean the filtering sponge in the pump
1. Keep the electrode clean of EC/pH meter and cover the electrode protective cap when not in use.
2. Turn off the meter when not in use for an extended amount of time.
F3. EC / pH Meter Use and Calibration
PATENT
www.opcomfarm.com
For more information, please visit
Intertek
US
C
CM
LTSTED
4010499
