GrowWall2
A. Assembly
Thank you for purchasing OPCOM Farm GrowWall2, the indoor hydroponics growing system. It is designed
with easy to use and efficient growth by one-touch AUTO mode. It holds up to 80 plants capacity. Read the
quick guide carefully before setting it up. For detailed user guide video, please scan the QR code or visit
GrowWall2 page at http://www.opcomfarm.com/Growwall2
A1. Remove all the parts from box and check all the accessories
.
☑
Please read and follow every steps to avoid any malfunction.
B2.Young plant stage
1. In each sponge, keep the strongest and thicker one and remove others.
2. Add 10.5 gallons water to the water tank.
3. During young plant stage (around 2 inches), turn on LED and Pump . Please refer to the ChartII.
4. Add NT-Starter into the water tank and ensure EC value between(=1.0-2.0mS/cm)
5. Ensure pH between 5.5-6.5 (adjust by pH+/-). For EC& pH adjustment instruction, please
refer to following Chart at below.
B3. Growing Stage
1. When plants grow to 3-4 inches height, switch control box to auto mode. Please refer to Chart II
.
2. After 4-6 weeks, harvest the larger plants for consumption and keep smaller plants growing.
3. For time saving, sow the new seeds in sprout tray one week before you start next planting process.
B. Seedling
C. Planting
2” Pots x 16pcs
2
3
Combination: You can mix different size of pots and sponges
in the growing hole of GrowWall2.
C1.Planting Process: Buy plants from local stores
Choose a suitable filter bag size for 2", 3", 4" pot, put it into the
filter bag and tie the strings(Fig1), For 5", 6" pot, remove the pot
and put it into 4" filter bag, tie the strings and put into tranfer
pot(optional)(Fig2) ; Then put the plants into tank(Fig3)
C2. Flower Selection
Rainbow Tree
Chlorophytum
Lucky Bamboo
Chrysanthemum
Snake Plant
Formaldehyde Clean
White Bunny Ears
Golden barrel
Mottled Spurge
Turk's Cap Cactus Golden ball cactus
Trichloroethylene Clean
Dot plant
Wax Plant
Dragon tree
Barberton daisy
Dragon tree
Carbon dioxide & Formaldehyde Clean
Dumbcane
Tuberous Sword Fern
Flaming lily
Evergreen
Pteris cretica
Xylene Clean
Ivy
Peace Lilies
Parlour Palm
Aloe
Spiral-leaved croton
Carbon Monoxide Clean
L1
L2
L3
L4
L5
NT-Starter x3pcs
(OAMS26K for 40L)
pH+ x15pcs
pH- x15pcs
NT-Adjuster x15pcs
(OAMS29K for 40L)
Grow Sponge 2x60pk
(OASS01K For Green Lettuce)
Grow Sponge 2x60pk
(OASS02K For Red Leaf Lettuce)
Grow Sponge 2x60pk
(OASS06K For Basil)
Seedling tray(ST-70) x2pcs
(521*189*82mm)
2. Nourishment:
1. Seedling Kit:
Grow Kits
Planting Kit
3. pH adjusters:
1. Small Filter Bag x30pcs
2. Large Filter Bag x30pcs
Status
NT-Adjuster
0.0-0.5
(Add 2pcs)
0.5-1.0
(Add 1pcs)
1.0-1.5
Standard range
over 2.0
Add water
Satus
pH+
pH-
4.0-4.5
(Add 3pcs)
4.5-5.0
(Add 2pcs)
5.0-5.5
(Add 1pcs)
5.5-6.5
Standard range
Standard range
6.5-7.0
1pcs
7.0-7.5
2pcs
4-6 weeks
Harvest
Cut off Large leaf
1 week
Keep
for regrow
Chart II: Plant Stage
Basil, Lemon Balm
Sprout Stage
Young plant stage
Growing Stage
Planting Time
Day 0~7
Day 3~14
After Day 14
LED Mode
N/A
ON
Auto
Pump Mode
N/A
ON
Auto
Notes
The sponge is fully wetin seedling tray.
* Please keep the seedling sponge package in refrigerator if you don’t use it.
* For your expected plant amout, you can refer to the sprout rate of 1st planting cycle.
* If you need more planting information, please vist to www.opcomfarm.com to read “Plant Q&A”.
Nourishment
N/A
NT-Starter
NT-Adjuster
T
(℃)
20
℃
- 25
℃
15
℃
- 30
℃
15
℃
- 30
℃
RH
80%
45%-70%
45%-70%
EC
0.5-1.0
1.0-2.0
1.0-2.0
pH
5.5-6.5
5.5-6.5
5.5-6.5
Plant Size
Sponge Number
Planting number
How to Set up x 3 Layer
Medium-Large
60
40 (70%)
Plant Size
Sponge Number
Planting number
How to Set up x 3 Layer
Small
120
80 (70%)
2”x 8pcs
1Line
4”x 4pcs
1Line
3”x 5pcs
1Line
Free combination
Follow the number of corresponding layers to the picture above, from
bottom to top. Insert the base stands (both sides) onto L1 and lock it. Stack
L2 on top of L1 and secure with quick locks on both side. Repeat the same
step until L5 is locked and in place.
of light bar(L32T) to the L shaped light bar holders. Make sure power cable
A2. Assemble GrowWall2 main body.
1
2
Connect all the LED, control box, and water motor cables according
to the marks on every splitter box. Organize all the lines, cables and
splitter boxes inside the C cuff per layer.
5
1
(Fig1)
(Fig2)
(Fig3)
4"
5"
2"
3"
6"
of the light bar is on the right.
Chart I: Control Box Mode
Status
Auto
ON
High
Low
OFF
Fuction
Pump
Light
Time(On/Off)
48 cycles/day
4 cycles/day
2 cycle/day
0 cycle/day
( 10 mins/cycle )
( 15 mins/cycle )
( 10 mins/cycle )
( 10 mins/cycle )
Status
Auto
ON
High
Low
OFF
Fuction
LED
Light
Time(On/Off)
16H/8H
24H/0H
48 cycles/day
18H/6H
10H/14H
0H/24H
Most plants can be grown using the AUTO mode.
*
* You can reset the product timeline by pushing the LED button for 2 sec.
B1. Sprout stage
1. Add water into the seedling tray, up to the water (red) line.(Fig1)
2. Open Grow Sponge package, put the sponge into water of seedling tray(make sure the front side with
the seed label is up), press the sponge into water 5 seconds and let the sponge absorb water completely.(Fig1)
3. Place the seedling tray with cover in the shade or cover it with black cloth(to block light).(Fig2)
4. Spray water to Sponges and keep them wet everyday.(Fig3)
5.During 7 days(leaf plant), find the sprouted one in the tray; pick it out, and move it into product (make
sure the sponges line up with the black dot on the partition) and to next stage: B2. Young Plant Stage.
6. Discard unsprouted sponge after regular germination time.
* Different plant may have different germination time, please check it before plant.
L1
L2
L3
L4
L5
AC
LED
LED
LED
LED
(Fig1)
(Fig2)
(Fig3)
(Fig2)
Soil F
Soil Free: Remove pot(Fig1) and put into filter bag(Fig2) and then move
to the product(Fig3).
1. EC & pH
Meter x1pcs
3. Waterproof
tape x1pcs
Accessories
2. Anti-insect
net x1pcs
Manual
Warranty Card
Quick Guide Manual
Quick Guide Manual
Planting Partition x 10
Hose x 1
Light Bar
Holder x 2
Base
LED Growth Tube
Stand x 2
Wall Mount
Brackets x 2
Anchor
Bolt x 2
AC
Cable x 1
L32Tx1
L15Tx8
Lean and tilt the fully assembled product against the wall. Keep the
base stands 8.2 inch(21cm) away from the wall. Use the levelers on
the bottom of each base stands to even out the whole unit. Please
find the bubble level tool on L1 water tray for this task.
Add 10.5 gallons (80% full) water to the water tank.
the valvetap in the pump cloclwisely to increase water flow and
Water flow is adjustable per water requirements of the plants. Rotate
counter-clockwise to decrease water flow.
Please use included insect net to create better growing environment
and cleaner produce.
6
7
8
9
4. Other Installations
Anti -Insect Net
9
Adhesive for flat surface
(recommend).
Screws for solid installation
(Remove R5 / L5 before
using screws).
Wall Mount Brackets
7
10.5 gallon(40L)
6
6
LED
L4
L4
System
5
PUMP
L1
L1
AC
L1
L2
L3
L4
L5
1
A2
2. Water Line setup
3. Electric Line setup
1. Assembly
(Fig1)
(Fig2)
(Fig3)
43
4
2
Install 2 Anchor Bolt with Wall Mount Brackets on the both side of
L5 and place 2 Light Bar Holder on the Anchor Bolt.Insert two ends
Attach the control box with clip buckles.
4
Link water hose from L5 water tray to water pump then tie it up on
both ends with hose clamps.
3
L32T
PUMP
3
This side up!
8
PUMP
