background image

Quick Guide Manual

E. GrowBox Q&A

H.  Q&A

         Q1 : Sprouts are stuck in the sponge and can’t come out.
        

A1 : Pull the sprouts gently out from the sponge with tweezers, make sure the seed capsule’s top half is not stopping the growth of a sprout.

        

To see more information of planting, please refer to GrowBox planting Q&A.

F. Maintenance

         Change Water
        

After a cycle of planting, you may want to change water, or clean the unit.(Fig1)

         EC / pH Meter Use and Calibration

                 

Everytime you use the EC/pH Meter, please wash electrode by regular water and keep it dry.

                 

Cover the electrode protective cap when not in use.

                 

Turn off the meter when not in use for an extended amount of time.

For more information, please visit 

www.opcomfarm.com

Ver.: 190123

1

3

2

    Answer

 

This can shorten the life of the pump.Maintain proper water level. Always keep water above the red line.

    

    The lamps provided with your GrowBox is standard E26 mount OPCOM 18W (L18B) LED Growth Lamp. This is 
    suitable for most plants’ growth. You may also use OPCOM Professional LED Growth Lamp 50W (L50B) to 
    accommodate special growth needs.
    
    The climbing tubes is an optional function for your GrowBox, and you will only need to install the climbing kit 
    when growing tall plants and vining plants like tomatoes. For these plants, the climbing tubes can be used to     
    support the plants as they grow.
    We recommend using the net if the product is in an environment where insects may be present.

Question 

Pump was 

running without 

water.
What type of  

lamps can be 

used in the 

GrowBox?

When should the 

climbing tubes 

be used?

When should we 

use the insect 

net?

G.  Installation steps of water pump

 Lift pump

Take down water pipe

 Take out connector

1. As shown in the picture:

prepare the backup pump.

D. Troubleshooting

Checkpoints / Solution

 Make sure all power cables are connected.
 Power button is ON.
 Make sure LED status is ON
 If it is on HI or LOW mode, the lamp has off time,  during 24-hour cycle.
 Pump may give off a buzzing sound in the beginning due to air inside the pump. After a minute with 
 water running through the pump, this sould be reduced.
 Control Box is designed with Auto, HI and LOW modes, which turn the lamps and the pump on and off at certain 

   in tervals. It simulates an outdoor daily cycle to offer the best growing condition

 Rotate the ring at the front end of the pump clockwise or counterclockwise to get the most suitable water flow  

Issue

Lamps not
lighting up

Pump has a 
buzzing sound
The lamp/ pump 
stop after hours

Reviews: