Opatra Synergy Eye, User Manual

Page: 11 / 16

CLEANING
• After each use, clean the OPATRA SYNERGY device with a damp cloth (not wet) or
with sterilising wipes on the stainless-steel treatment head. Dry with a soft dry
cloth or paper towel and return to the docking station.
• Always clean the device after each use.
• Avoid using detergents or chemical cleansers to clean the device.
TROUBLE-SHOOTING
• The Opatra Synergy Eye Device contains NO serviceable parts.
• DO NOT attempt to repair the Synergy Eye Device yourself. Attempting to modify
the Synergy Eye Device in any way could cause an electric shock when the system
is used again.
• If your Synergy Eye Device does not switch ON, ensure that the power adaptor is
plugged into the charging station and place the hand piece on charge. Wait 2 hours.
After 2 hours press the power button. If the green light does not illuminate contact
Opatra or your retailer.
TECHNICAL SPECIFICATIONS OF SYNERGY EYE
MODEL NUMBER: SYNERGY EYE
MATERIALS: ABS HANDPIECE AND CHARGING STATION, STAINLESS STEEL TREATMENT HEAD.
NUMBER OF LEDS: 4
WAVELENGTHS: 633NM +/-5NM.
POWER SUPPLY: LITHIUM BATTERY 2 X 3.7V, 550MAH
POWER ADAPTOR: 100-240V AC50/60HZ 0.2A
WEIGHT: 285GRAMS (HANDPIECE; 220G, BASE STATION 65G)
9