O p a l e - P a r a m o d e l s . c o m
Opale Aero System SARL - 23 rue de la Motte
62250 MARQUISE - France
[email protected] +33(0)981 144 387
BEN P
IL
O
T
BEN P
IL
O
T
Fix the back pilot plate with the screw prepared earli-
er and hold it with another M3 nut.
Place the 2 servomotors between the 2 plates.
Fix them with 4 x CHC M3-35 screws and 4 x M3 nuts.
Then place the elastic on the screw at the back pilote
plate.
Place the head and fix the elastic on the screw located
at the bottom of the front plate.
The chest cavity allows also to carry a Mini/Micro
receiver in order to save the space inside the harness.
Fix the G10 part on the pilot leg, with 2 to 4 plastic
clamps (depending on the length of the clamps).
Tighten firmly and do the same on the opposit side.
14
