©Copyright by Opale-‐Paramodels 2012 v1.0
Page
4
sur
7
- A battery
- A transmitter / receiver set (3 channels at least)
2. Assembling the motor and the propeller
Remove the 4 nuts that are on the engine mounting screws.
Remove the 4 spacers. They are used to adjust the anti- torque of the motor.
From behind the chassis, the propeller should be rotating clockwise.
This implies that the engine must be mounted with some angle as shown on the picture below.
If the propeller has an anti-clockwise rotation then we need to reverse the tilt of the motor to the
left.
5°
