O p a l e - P a r a m o d e l s . c o m
Opale Aero System SARL - 23 rue de la Motte
62250 MARQUISE - France
[email protected] +33(0)981 144 387
O p a l e - P a r a m o d e l s . c o m
Opale Aero System SARL - 23 rue de la Motte
62250 MARQUISE - France
[email protected] +33(0)981 144 387
Back
pack M2
Back
pack M2
Servo Holder Assembly (option)
Landing Gear Assembly (option)
For each of the 3 inches wheels, pierce the passage
axis with a drill from 5 to 5,5 mm diameter. For the
two rear wheels, position a CHC M5-45 screw.
Lock the screw by mean of a M5 nut-locking. Do not
completely tighten it, in order to let the wheel rotate
free.
Fix the axis on the rear gear by mean of a second
M5 nut-locking. Repeat the same operation for the
opposite wheel.
For the front gear preparation, shorten with a cutter
the two spacers, from 1 to 2 mm.
Insert the CHC M5-45 screw and the first spacer.
Insert the wheel inside, place the second spacer, and
lock the set by mean of a M5 nut-locking.
Mount the front gear on the frame and fix it by mean
of 4x CHC M3-10 screws and M3 nut-lockings.
Remove the fixation beads of the speed controller.
Arrange then the rear landing gear and fix it by mean
of 4x CHC M4-12 screws and M4 nutlockings.
The speed controller can be fixed again on the rear
landing gear.
Unassemble the two fixation pilot parts.
Prepare the servo holder plate by installing 4x CHC
M3-8 screws and nuts
Mount the glassfiber arms on the servo horns by
using 2x cruciform M2-8 screws. Do the same for the
2nd servomotor.
Prepare the two pilots fixations with 4x CHC M4-40
screws and M4 washers
Put in place the servomotors and the two fixations on
the plate
Lock the 4x CHC M4-40 screws on the main backpack
plate with 4x M4 nuts.
The Backpack is now ready with the servo holder Kit.
Please use the provided rubbers to lock the lipo bat-
tery on the backpack.
For the servomotors settings:
- in neutral position (without Paramodels mixer), the
arms have to be horizontal.
- with the arms at up position (with Paramodels mixer
ON, elevator stick neutral) the arms have to be 45° up.
6
7
