Opal-RT OP8615, User Manual, Page: 6 / 12

6 OP8615 User Guide
OP8615 Break-Out Box
Pin Assignments
PIN ASSIGNMENTS
Connector Diagram
Each pair of jacks connects from a channel on the unit under test to a channel on the simulator.
RED
BLACK
OP8615 FRONT VIEW OP8615 REAR VIEW
RED -
OUT TO CONTROLLER
BLACK -
IN FROM SIMULATOR
Figure 2: Front banana jacks path to connector
Faults are manually created by removing a jumper into the desired channel jacks. The jumper used for
the break-out box are supplied.
In the event that replacements are needed, we recommend using the original part
(SKS2-12L/1SA/N, 12mm jumper, 2mm), or an equivalent.
As a general guideline, cables from the Break-Out Box to the controller should be connected on the RED
jacks and cables from the simulator to the Break-Out Box should be connected to the BLACK jacks.