Massage Chair User Manual
15
16
How to use the chair
Button
Function
ON/OFF
Auto
Location
Mode
Timing
Heating
Buttocks
Calves
Arms
Press this button to massage arms.
Vibration
Speed
Air pressure
Strength
Back upward
Back downward
Press the power button to turn on the massage chair.
Press again to power off, the the massage chair will
return to default upright position. The default time is 15
minutes.
Press this button to select one auto mode, there are 3
auto modes to choose from: Full Body Massage, Partial
Massage and Aid Sleep Massage.
Under manual mode, you can use the button to fix the
massage points with the buttons Upper/Lower
Timing: 5-20 minutes adjustable, 5 minutes as a
adjustable unit, default working time: 15 minutes.
Press this button to switch on/off the heating mode.
Press this button to massage buttocks.
Press this button to massage calves.
Press this button to activate the manual mode.
Press this button to massage arms.
Press this button switch on/off vibration
Press this buttons to adjust the speed.
Press this button to switch on/off the air pressure.
Press this buttons to adjust the strength.
Press and keep holding the button to raise the backrest.
Press and keep holding the button to lower the backrest.
Troubleshooting
Problem
Solution
*This is the sound produced by mechanical
structure
instead of failure of internal components.
*This may occur during normal operation.
The preset auto-timing has been reached.
In order to avoid the massage armchair from
causing accident due to overheat, this chair
is equippedwith overheat reboot protection
equipment.
If the chair stops and fails to restart as a
result of overheat, turn off the main power
switch for at least 30 minutes in order to
prevent it from suddenly starting after
components are cooled down.
The power button was pressed accidentally.
*Check the power plug and ensure that it is
indeed plugged into the socket.
*Check whether the lines on the back of the
massage chair are properly connected.
*Confirm the main power switch is turned on.
* Stop using immediately and contact the
service centre.
* Turn off the main switch on the back of the
chair and turn on 5 seconds later. If the
same problem is occurred again, please turn
off the main switch, unplug the power cord
and contact the customer service.
*The rollers and the backrest pad
make frictional sound.
*Motor sound is clearly hearable
during operation.
*Loud sound is given when tapping
and kneading massage is performed
*Massage is suddenly stopped and
the massage rollers return to their
original position.
*The remote controller does
not work.
*The power cord and plug are
excessively hot.
*The massage stops in the
process.
