5
4
Supplied loose in box:
Assembly Contents
Check what you have received...
You have received 1 box. Please check the contents of the box against the list below. If anything is
missing, please contact Customer Service. In Australia, contact CNP Brands on 1300 667 137, in
New Zealand contact Wainhouse Distribution on 0800 567 5000.
Assembly / Operating Instructions
Assembling Table
1.
Table lid
x1
Allen key
x1
Table top
x1
Seat back panel
x1
Table leg
x4
Seat panel
x2
Seat back
panel
x1
Chair leg
x8
Bolt (48mm)
x4
Place a table leg into position as shown in the image. Line up the
screw that is attached to the leg and insert gently into the
pre-drilled hole underneath the table.
Turn the leg clockwise until leg is firmly into position.
3. Insert lid into the middle of the table as per image.
2. Repeat the above step with the remaining 3 legs.
Turn the table upright.
PLEASE NOTE:
Do not over tighten the legs.
