Oontz SUP Mount & Bracket User Manual Download Page 2

Assemble the OontZ SUP Mount and Base to your Paddleboard, 

Surfboard or other smooth surface.

   - Adheres best to smooth surfaces such as epoxy, 

     ABS and fiberglass.

   - Rough surfaces or glass may not adhere firmly and cause the

     mount with the speaker attached to fall off.

1) Peel off the yellow cover on one side of the 3M tape.  
2) Press the side of the 3M tape with the yellow cover

removed to the bottom of the OontZ SUP Mount and Base.  
3) Peel off the red cover from the 3M Tape.

4) Place the OontZ SUP Mount and Base on the dry, smooth

surface and press down to adhere the mount to the surface.

3M Tape

1

OontZ SUP

Mount and Base

Note:

 After placing the OontZ 

SUP Mount on the surface, it 

is recommnended to keep the

surface dry and let the 3M tape

adhere to the surface for a 

minimum of 20 minutes 

before use.

Reviews: