5. Pairing the OontZ Angle to your Bluetooth Device
(continued)
IMPORTANT NOTE: The OontZ Angle can only be connected to one device at a
time. You will need to disconnect the first device from the OontZ Angle before trying
to pair to another device: To disconnect a device from the OontZ Angle press and
hold the
“Bluetooth symbol and phone icon” Button
for about 5 to 6 seconds until
the
Pairing Indicator light
on the front of the front of the OontZ Angle is blue with
flashing red. The blue light with flashing red indicates the device is disconnected and
the OontZ Angle is in pairing mode.
You can then pair and connect to the next device.
IMPORTANT NOTE: The OontZ Angle will automatically try to pair to the last
connected device each time the OontZ Angle is turned on and that device is or comes
within range. If the OontZ Angle successfully connects to the last device it will
prevent any other device from pairing to it, until that device is disconnected. If you
have multiple Bluetooth devices and you are not able to pair to a Bluetooth device,
please check the other devices to see if the OontZ Angle has already connected to it.
If the OontZ Angle is connected, please disconnect that device so the next device can
be paired and connected.
Page 8
