Page 17
– Turn on one of OontZ Angle 3 Pro Soundbar speaker.
– Connect the speaker to your device with Bluetooth, 3.5mm audio cable or Optical Digital Audio Cable. This speaker will serve as the
Host Speaker.
– Turn on the other supported OontZ speakers. These speakers will be the
Guest Speakers
.
– The
Guest Speakers
must not be connected to any device, their Source Button Light must be
fl
ashing with a Blue light. If a speaker
has a solid Blue Light it is connected to a device and you need to disconnect it by pressing and holding down the
Multi-Function
Button
for 3 seconds until the Source Button Light begins
fl
ashing with a Blue light.
– On the OontZ Angle 3 Pro Soundbar (
Host Speaker)
press and release the
Multi-Function Button .
The Play/Pause Button Light
will turn solid Orange and the speaker will say “Surround Mode Transmit”.
– On the
Guest Speakers
with a
fl
ashing Blue Light, press and release the
Multi-Function Button .
The Play/Pause Button Light will
fl
ash Orange and the speaker will say “Surround Mode Receive”.
– After a few seconds each speaker will connect with the
Host Speaker
and will have the Play/Pause Button Light lit with a solid Orange
light.
Surround Mode - Connecting 2, 3 or 4 Supported OontZ speakers to OontZ Angle 3 Pro Soundbar
You can also us the OontZ app to connect the supported OontZ speakers together - See page 20 for instructions on using the OontZ app
Note:
The OontZ Angle 3 Pro Soundbar is compatible with the OontZ Angle 3 ULTRA (4th Gen) and OontZ Angle 3
Pro (2nd Gen) speakers. It is NOT compatible with other OontZ Speakers or previous generations of the OontZ
Angle 3 ULTRA or OontZ Angle 3 Pro speakers
