20
4. Position the front of machine up against the front of the trailer or truck. Select brush and vacuum mode
to the ON position. This will lower the pad/brush head and squeegee.
5. Switch power key to OFF position.
6. Place a block behind each wheel to prevent the machine from rolling.
7. Secure with tie-down straps. It may be necessary to install tie-down brackets to trailer or truck.
Note: Do not let the machine be subject to rain, excessive amounts of humidity and moisture, and store
indoor.
1. Please charge the battery before storage.
2. Switch vacuum and brush motor switches to the OFF position, this will place pad/brush head and
squeegee in up position.
3. Switch power key to OFF position.
4. Disconnect the batteries before any long-term storage.
5. Drain and flush thoroughly the bottom of the water tank.
6. Store the machine in a dry place.
7. Open the cover of the waste water tank.
8. Note: Do not let the machine be subject to rain, excessive amounts of humidity and moisture, and store
indoor.
9. If the machine is stored in a cold environment, drain all liquid in the machine.
MACHINE MAINTENANCE
MACHINE STORAGE
Note: To move the machine without using
the battery power, lift the yellow lever
to the UP position. This disengages the
automatic brake and allows the machine
to be moved manually. For normal battery
powered use, the yellow lever should be in
the down position.
Summary of Contents for RX-20
Page 24: ...onyxsolutions com...
