Onyx MD70-Pro, User Manual

Page: 24 / 51

M D 7 0 - P r o
24
2.3 Charging the battery
Use only the power adapter that comes with your device.
Using a different power adapter may damage your device.
1. Plug the AC charger into a wall outlet.
2. Connect the DC end of the adapter to the MD70-Pro HDMI-B
type connector.
Note : The battery is not fully charged. Allow your battery to fully charge
before using it (i.e., before disconnecting AC power). Calibrating the battery
before use is also highly recommended.
The power button turns your device on and off. Hold the button for two
seconds to power on. To start or wake it up from sleep mode, hold the
power button for 0.5 seconds to display the shutdown confirmation. If the
system is unresponsive, hold the power button to power off. A forced power
off may result in data loss. It is strongly recommended that important data
is backed up on a regular basis.
2.4 Turn on / off the device
1. Turn on : Press the Power button on the top of the device. Wait
for the boot screen to display.
2.Turn off : Press and hold the Power button on the top of the
DC in