background image

8. DAILY MAINTENANCE AND STORAGE

Cleaning and storing the electric scooter

If there are stains on the electric scooter housing, use a soft damp cloth to clean it. You can use also toothpaste and toothbrush and then wipe it 
with a soft damp cloth. 

Warning: do not use alcohol, petrol, kerosene or other corrosive nor chemical solvents to clean the electric scooter. Otherwise it can cause 
serious damages to the body of the electric scooter and it can disrupt its structure or its inner parts.

Do not wash the electric scooter with pressured water and make sure that it is off while you are cleaning it. Be sure that the charger cover is 
closed while you are cleaning the electric scooter in order to prevent you from electric shocks caused by water infiltration.

If you do not use the electric scooter, store it in a dry, cool place. Do not leave the electric scooter in the open air for long time as leaving the 
electric scooter under direct sunlight, at high or low temperatures can cause damages and fast wear off of its components.

Maintenance of the electric scooter battery

1)

Use only original batteries in order to avoid dangerous situations;

2)

Do not open or disasseble the battery, it may cause electric shocks. Do not leave the battery in contact with objects made of metal as it
may cause short circuit, malfunctions or injuries;

3)

It is recommended to use the AC adapter to configure the electric scooter in order to prevent it from damages or fires;

4)

The improper disposal of used batteries and accumulators may cause environmental pollution. Dispose the batteries according to the
local laws and regulations and do not throw them in the common waste. Take care of the environment!

5)

Charge the batteries of the electric scooter after each usage in order to enhance the product life.

Do not store the batteries of the electric scooter in environments at temperatures of 20°C-50°C (for example: do not leave the electric scooter 
nor the batteries in the car during the summer season under the direct sunlight) nor near the fire. As a result the battery may deteriorate, 
overheat or even inflammate itself.

If you do not use the electric scooter for 30 days consecutively, charge the batteries before using it and keep it in a cool and dry place. If the 
electric scooter is meant to be inactive for long time, we recommend you to charge the batteries every 60 days to prevent it from battery failu-
re, which is not subjected to warranty assistance.

Avoid full discharge of the batteries as it will extend the product life. At room temperature the electric scooter works at its best on performan-
ces concerning covering long distances and battery level. If you use the electric scooter at temperatures below 0°C, the vehicle performances 
and permeability decrease.

At – 20°C the electric scooter is able to cover less distances than its normal conditions. If the temperatures increase, either the performances of 
the electric scooter increase. You can check the distances and conditions of the electric scooter in the Model specifications.

Note: the full charge battery works for 120-180 days. The battery contains a smart chip that stores information about the charge and the 
discharge. If you do not charge the battery for long time, it may get damaged to the point that it would be impossible to charge it again. This 
kind of damages are not included in the warranty assistance. Warning: do not get the electric scooter disassembled by unauthorized people as 
it may cause electric shocks, serious injuries or short circuit)

Summary of Contents for Sprocket-B














Reviews: