For demo and installation videos visit:
www.oncamgrandeye.com/security-systems/180_degree_cameras
Evolution 180
Outdoor
Camera
QUICK START GUIDE
Read these instructions carefully before
installing or operating this camera.
This camera should be installed by a qualified
service person and the installation should
conform to local and national regulations.
This camera is not suitable for installation in
a ceiling void that is used as an air handling
space.
Certified as FCC Class A. In a domestic
environment this camera may cause radio
interference in which case the user should take
adequate measures.
DANGER: RISK OF EXPLOSION IF
REPLACING A BATTERY WITH AN
INCORRECT BATTERY TYPE.
For the Datasheet, A&E Specification, Installation and User Manual, Software
and Firmware visit:
https://www.oncamgrandeye.com/product-downloads/
Tel:
UK +44 20 7371 6640
US +1 978 735 4860
Email:
Make a note of the camera’s MAC address and installation location. Find the MAC
address printed on the camera label. This information may be needed during the camera
configuration.
Power Input
Power over Ethernet
(PoE),
IEEE standard 802.3af
or 12 VDC, 1.0 A (min)
LPS, NEC Class 2
power supply
IP Rating
IP66, IP67, IP68 (2m
30min), IP69K, IK10+
Operating
Temperature
(°C / °F)
-40°C to 55°C (-40 °F
to +131°F)
Enclosure
Aluminium and
Polymer
Weight
2.6 kg (5.73 lbs)
Important
Specification
Powering the Camera
Supply power to the camera with PoE IEEE802.3af through the integrated RJ45 Ethernet port
or using the 12V DC input pins on the I/O connector. (Do not use both power sources at the
same time). Both camera LEDs will be green when the camera is booted with an ethernet
connection.
IP Settings
In order to use the camera you will need its IP address.
There are two IP modes:
•
DHCP
•
Static IP (Default static IP is:
192.168.0.200)
Should a DHCP server not be available, the camera adopts the default static IP address
above.
There are 2 methods for accessing the camera stream, either through the Configuration Tool
or via a Browser if the camera’s IP address is known.
Note:
See the camera’s User Manual and Camera Configuration Tool User Manual for IP
Setting adjustments.
Viewing Video in Internet Explorer 11
1. Download and install VLC (
https://www.
videolan.org/vlc
).
Accessing the camera using any
browser
1. Enter the camera’s IP address into the
browser’s address bar.
2. Enter the camera’s User Name and
Password.
Startup
Using a Browser to access cameras
Go to the Oncam website
to download the latest
version of the Oncam
360-degree Viewer (
https://
www.oncamgrandeye.
com/security-systems/360-
camera-viewer/
).
Install the 360-degree Viewer
and start it. Select the top
left hand icon in menu bar
to view the list of cameras.
Select a camera in the list
and click ‘View Camera’ to
access the camera stream.
Using the 360 Degree Viewer
The camera’s web GUI has sophisticated adjustments in the IMAGE tab, for different
mounting angles and scenes.
If the camera itself is tilted, set the wall mount angle corresponding to the tilt (e.g.
-25°, -45°)
to make vertical lines in the scene parallel.
Scene offset angle allows the panoramic view to be tilted up or down to precisely
capture the desired scene.
Adjusting the angle
Technical Support
MAC Address
Next Steps
The Camera Configuration tool quickly finds the IP and MAC addresses of all Oncam
cameras connected to the network. It also allows you to change network settings, configure
multiple cameras and perform software updates.
Go to the Oncam website (
https://www.oncamgrandeye.com/security-systems/camera-
configuration-tool
) to download the latest version of the Camera Configuration tool and its
User Manual.
Using the Camera Configuration Tool
Start the application, and
the software will scan the
network and provide a list
of all connected Oncam
cameras, as shown.
EVO-180-WED
Download our FREE ONVU360 mobile application and
put the EVO-180° real time monitoring experience right at
your fingertips.
Note:
Internet Explorer 11 is required to view live camera images in
the browser. All other browsers can be used for Configuration
Purposes only.
EVO-180-WED-03
|
Outdoor QSG
|
04/2018
|
Rev 1.2
Copyright 2018 by ONVU Technologies AG. All rights reserved. Oncam is a trading name of ONVU Technologies AG.
Subject to change without notice. All screen images are simulated. Specifications and configurations subject to change
without notice.
Default Password
User Name:
admin
Password:
admin
