Onvif IPVD3TI Installation Manual Download Page 3

 

FCC COMPLIANCE  STATEMENT

 

 

 

 

 

 

 

 

 

 

CE COMPLIANCE  STATEMENT

 

 

 

 

 

CAUTION

 

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT  TYPE. 

DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. 

WARNING

 

This is a Class A product. In a domestic environment this product may  cause 
radio  interference  in  which  case  the  user  may  be  required  to  take  adequate 
measures. 

This Class A digital apparatus complies with Canadian    ICES-003. 
Cet appareil nume` rique de la classe A est conforme a´ la norme NMB-003 du 
Canada. 

CAUTION: 

Changes or modifications not expressly approved by the  party 

responsible  for  compliance  could  void  the 

user’s  authority  to  operate  the 

equipment. 

FCC  INFORMATION: 

This  equipment  has  been  tested  and  found  to 

comply  with  the  limits  for  a  Class  A  digital  device,  pursuant  to  Part  15  of 
the  FCC  Rules.  These  limits  are  designed  to  provide  reasonable  protection 
against  harmful  interference  when  the  equipment  is  operated  in  a  commer- 
cial  environment.  This  equipment  generates,  uses,  and  can  radiate  radio 
frequency  energy  and,  if  not  installed  and  used  in  accordance  with  the  in- 
struction  manual,  may  cause  harmful  interference  to  radio  communications. 
Operation of this equipment in a residential area is likely to cause harmful  in- 
terference in which case the user will be required to correct the interference 
at his own  expense. 

This  device  complies  with  Part  15  of  the  FCC  Rules.  Operation  is  subject 
to  the  following  two  conditions:  (1)  this  device  may  not  cause  harmful  inter- 
ference, and (2) this device must accept any interference received,  including 
interference that may cause undesired   operation. 

Summary of Contents for IPVD3TI















Reviews: