Page 19
2 Mega Pixel IP Camera User Manual
5.4
Alarm Configuration
Alarm configuration includes six submenus: Motion Detection Area, Motion Detection
Trigger, Motion Detection Schedule, Alarm Input Trigger, Alarm Input Schedule and Alarm
Out.
5.4.1
Motion Detection Area
1.
Go to
“Alarm configuration”
Æ
“
Motion Detection Area
”
to see an interface as below.
2. Move the
“
Sensitivity
”
scroll bar to set up the motion trace sensitivity.
3. Check the
“Add”, press the “
Ctrl
”
button and move mouse to select the motion detection
area.
Select “Erase” and move the mouse to clear all motion detection area.
4. Press the
“
Save
”
button to save the settings.
5.4.2
Motion Detection Trigger
1. Go to
“Alarm
Configuration
”
Æ
“
Motion Detection Trigger
”
to display an interface as
shown below.
2. Check
“
Enable alarm
”
check box. Then motion based alarm is activated.