PoE
splitter
cable
installation
instruction
Installation guide
Please use the assorted equipments to install
Installation
Make the splitter and the power sourcing equipments/PoE devices combined, then the combination can
supply power to the AP, IP camera, IP telephone and the other network equipments in the situation of lacking
of power line or far away from the power outlets.
Please link the PoE splitter correctly in the following steps:
1) Using the 5 styles UTP to link with the power sourcing equipment's PoE port (like the PoE Switch) and
the the PoE splitter's IN port ;
2) Before connecting to devices, please make sure whether the working voltage status of the PoE splitter
accord with the input devices
3) Using 5 styles UTP to link the Ethernet OUT port of the PoE splitter and Ethernet device, then the two
devices can transmit the data.
4) Using the assorted power line to link DC OUT port of the PoE splitter and the power port of the Ethernet devices.
Attention:
1) The power rate of the Ethernet device linked with the PoE splitter cann't exceed the maximum rate of the PoE splitter.
2) Please make sure to choose the correct output voltage, the unmatched voltage may damage the device.
Confirm before installation:
1. Whether the power rate of PoE port is suitable with the requisition of input device;
2. Whether the PoE criterion and the power supply mode is suitable with the powered device.
3. Whether the output rate of asserted power adapter is suitable with the requisition of switch.
