ONTROL E3122, Owner'S Manual, Page: 7 / 12

- 5 - KP0036
VIEW INPUTS & OUTPUTS
This menu allows you to read the current status of any connected input or output point. Since values
are referenced by input or output number, you need to have a list of connected inputs and outputs by
point number. Typically, this list is written down, by the installer in Appendix A of this manual.
Penetration Path
You reach the “View I/O” menu following the below path from the top screen.
Use
This display allows viewing of two connected points simultaneously. You can select the desired point
in the following way:
•
Position the cursor over the first letter of any line and press any digit key to toggle between “I”
(input point) and “O” (output point.)
•
Move the cursor to the point number, and type in the desired point number.
After each change, the value of the selected points will be displayed instantaneously. This display is
continuously updated. The values on display will be refreshed automatically as the inputs or outputs
change.
Values of analog input and output points are displayed with appropriate engineering unit. Condition of
digital input and output points are displayed with descriptive state names.
An exclamation mark (“!”) indicates that the value is fixed, i.e. it is not updated automatically and
remains at the displayed value. To fix or unfix a point, see page 8.
The controller will remember the points that you last selected and will display them when you re-enter
this menu.
1.Edit Setpoints
2.View I/O
3.View Process
4.Fix/Unfix I/O
5.Configuration
I5= 16.5°C !
O3= START
Ontrol E3122
Main1= 21.2°C
9
2