9-56
INTEGRA Operations Revision A
7/26/00
20-0200-231 (CR), 20-0200-232 (Std), 20-0200-251 (CD)
Change Meg Event TIME
6 Touch TIME to display the
NUMBER PAD
screen (not shown) and
set the Meg spin EVENT time in
10
th
of seconds
.
The
TIME
displays
on the screen in
seconds
.
A
NOTE:
For the Megasonic Event
only
, set the time to
0
seconds. The event time is the
actual time it takes to complete the programmed number of sweeps at the sweep per
seconds programmed during the event. TIME changes should only be determined and
changed by the process engineer.
Change SPINDLE SPEED (During Meg)
7 Touch SPINDLE SPEED to display the
NUMBER PAD
to set the
spindle speed.
STANDARD
STANDARD
Summary of Contents for Synergy Integra
