background image

3

2

Warning

 

Á

Failure to follow all safety warnings may result 

in severe injury or death.

 ·

Always 

load the trailer correctly. Follow the trail-

er and tow vehicle manufacturers’ recommenda-

tions for placement and quantity of cargo.

 ·

Always 

turn the OnTarget off when not in use or 

left unattended. 

 ·

Keep

 the OnTarget out of the reach of children. 

 ·

Never

 attempt to view the laser beam through 

optical tools such as telescopes as serious eye 

injury may result. 

 ·

Never

 operate the laser in explosive environ-

ments, i.e., in the presence of gases or flammable 

liquids. 

 ·

Never

 place the OnTarget in a manner that may 

cause someone to unintentionally stare into the 

laser beam. Serious eye injury may result. 

 ·

Never

 project the laser beam directly into the 

eyes of others. 

 ·

Never

 set up the OnTarget at eye level or operate 

the tool near a reflective surface as the laser beam 

could be projected into your eyes or into the eyes 

of others. 

 ·

Never

 stare directly at the laser beam. 

 ·

Never

 transfer your hitch to a different tow 

vehicle or trailer without adjusting the hitch for 

proper setup and weight distribution.

 ·

Read,

 understand, and follow all safety warn-

ings, setup, use, and maintenance instructions 

of the trailer, tow vehicle, and hitch equipment 

before installing the hitch or towing your trailer.

 ·

Remove

 the batteries when storing the tool for 

an extended time (more than 3 months) to avoid 

damage to the OnTarget should the batteries 

deteriorate.

 ·

The operator 

is responsible for making neces-

sary adjustments to the hitch to optimize weight 

distribution and sway control. Verify that the 

hitch is adjusted correctly after loading the trailer 

and tow vehicle for each trip. The weight distri-

bution setup and towing performance should 

be evaluated by the operator and adjusted when 

necessary.

 · The warning label affixed to the back of the 

OnTarget should not be removed.

 · Use of controls or adjustments or performance of 

procedures other than those specified herein may 

result in hazardous radiation exposure.

Summary of Contents for SW-50C








Reviews: