OnStar Gen 6, Owner'S Manual

Page: 8 / 48

Page 6
OnStar
• When your radio mutes and you hear ringing,
press this button to answer an incoming phone call.
• To end any call including an OnStar call or a
personal call.
The button used for Personal Calling and to end calls
with an Advisor is marked with either a white-dot or a
phone symbol. There is no difference in functionality.
System Status Light
Solid Green
—Indicates the OnStar system in the vehicle
is powered ON and ready to make or receive calls.
Blinking Green
— The light blinks green to indicate a
call is being connected or in progress. If you notice this
light blinking while you are not on a call, press the
OnStar white-dot button.
Red
— This signals that your OnStar system may not be
functioning properly. Press the OnStar button to attempt
to contact an OnStar Advisor. If the connection is made,
the Advisor will assist you in making sure your OnStar
system is operating properly. If you cannot contact the
OnStar Call Center, please take your vehicle to your
vehicle dealership for diagnosis and service.
Volume Control
Use the volume control on your radio to control the
OnStar volume. If your vehicle is equipped with
steering-wheel controls, the volume can also be
changed with these controls.
Advisor Playback
Your OnStar system is equipped with an Advisor
playback recorder to store information given to you
during a call with an OnStar Advisor. You can play
back the stored audio information at a later time,
when you are no longer connected to OnStar.