HOBO Data Node, Ext Temp/RH, Analog, Pulse (ZW-005)
© 2012 Onset Computer Corporation. All rights reserved. Onset and HOBO are trademarks or
registered trademarks of Onset Computer Corporation.
All other trademarks are the property of
their respective companies.
13556-E MAN-ZW-005
Specifications (continued)
Time accuracy
± 1 minute per month at 25°C (77°F)
Memory capacity
128K
Power options
Data mode: battery powered (3 AAA alkaline batteries); 1-year battery life at
15-minute logging interval
Data/router mode: AC power adapter (input: 100–240 V at 50/60 Hz 0.20 A
output: 6 VDC at 0.5 A), batteries as backup power
Case material
ABS
Dimensions
96.5 x 108 x 28 mm (3.8 x 4.25 x 1.1 in.)
Weight (with batteries)
138 g (4.87 oz)
The CE Marking identifies this product as complying with all relevant
directives in the European Union (EU).
See below
Plot A
FCC Compliance
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following
measures:
•
Reorient or relocate the receiving antenna
•
Increase the separation between the equipment and receiver
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
•
Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by Onset Computer Corporation could void the user's authority to operate the equipment.
To comply with FCC and Industry Canada RF radiation exposure limits for general population, the HOBO data nodes, receivers, and routers must be
installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna
or transmitter.
Canada
This device has been designed to operate with the antenna listed below, and having a maximum gain of 1 dB. Antennas not included in this list or having a
gain greater than 1 dB are strictly prohibited for use with this device. The required antenna impedance is 50 ohms.
To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power
(e.i.r.p.) is not more than that permitted for successful communication.
Approved antenna:
Johanson Technologies P/N 2450AT45A100 1.0 dBi chip antenna
FCC Declaration of Conformity
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2)
this device must accept any interference received, including interference that may cause undesired operation.