background image

To learn more about onsemi™, please visit our website at 

www.onsemi.com

ON Semiconductor

Is Now

onsemi

 and       and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “

onsemi

” or its affiliates and/or 

subsidiaries in the United States and/or other countries. 

onsemi

 owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of 

onsemi

 

product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. 

onsemi

 reserves the right to make changes at any time to any products or information herein, without 

notice. The information herein is provided “as-is” and 

onsemi

 makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, 

or suitability of its products for any particular purpose, nor does 

onsemi

 assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all 

liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using 

onsemi

 products, including compliance with all laws, 

regulations and safety requirements or standards, regardless of any support or applications information provided by 

onsemi

. “Typical” parameters which may be provided in 

onsemi

 data sheets and/

or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application 
by customer’s technical experts. 

onsemi

 does not convey any license under any of its intellectual property rights nor the rights of others. 

onsemi

 products are not designed, intended, or authorized 

for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for 
implantation in the human body. Should Buyer purchase or use 

onsemi

 products for any such unintended or unauthorized application, Buyer shall indemnify and hold 

onsemi

 and its officers, employees, 

subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death 
associated with such unintended or unauthorized use, even if such claim alleges that 

onsemi

 was negligent regarding the design or manufacture of the part. 

onsemi

 is an Equal Opportunity/Affirmative 

Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. Other names and brands may be claimed as the property of others. 

Summary of Contents for LC709204F


















Reviews: