
10
Repeat steps 1-6 for the
DAY,
EVE,
and
NITE
periods.
Afterwards,
repeat steps 1-6 for 4 daily periods on Saturdays (Day 6), and 4 daily
periods on Sundays (Day 7).
The temperature display will show "6"
for Saturdays, and "7" for Sunday times.
Note:
If
Programming Mode
is not being used and
Day/Night
Mode
is being used, only the Weekday -
DAY
and
NITE
settings can be programmed.
!
DAY/NIGHT MODE
Your thermostat can be configured to change its temperature settings
from
"DAY"
to
"NITE"
when commanded from a remote location.
If so, the thermostat will use the weekday
"DAY"
and the weekday
"NITE"
settings.
"REMOTE"
and either
"DAY"
or
"NITE"
will be displayed when a
command is sent from a remote location. You can use the arrow keys
(
∧−∨)
to override the temperature settings, or press the Hold key to
prevent any future remote changes.
Follow the procedure shown in
Programming Mode
, to change the
programmed
DAY
and
NITE
settings.
Summary of Contents for 363445-04
