OnPoint OPG7KE17SSPSS, Owner'S Manual

Page: 5 / 8

5
Using the Kettle
Before Getting Started
When using for the first time or after a lengthy period of
disuse, we recommended to fill the product up to the Max
mark with cold water, bring to boil, then discard the water
and repeat. This will remove potential extraneous and
unwanted residues.
Operation of Mechanical Model: G7KE17SSPSS
This appliance is for household use only.
• Press the lid release button to open the lid.
• Fill the product with water (Do NOT fill above the max
line).
• Fill at least 2 cups of water.
• Close the lid. Place the product on the base.
• Connect the plug to a power outlet. Press the On/Off
switch down.
• The light goes on, the product is now heating the water.
• The product will switch off automatically when the water
starts boiling. The light will then go out.
• The product features a safety switch that shuts it down if
it boils dry. If this should occur, remove it from the base
and wait until it cools down before using it again. NOTE:
The kettle should ONLY be used with the base provided.
Care and Cleaning
Operation of Electric Model: G7KD15SSPSS
This appliance is for household use only.
• Press the lid release button to open the lid.
• Fill the product with water (Do NOT fill above the max
line).
• Fill at least 2 cups of water.
• Close the lid. Place the product on the base.
• Connect the plug to a power outlet. Press the Power
button located on the product handle.
• Choose desired temperature using the -/+ buttons.
• The product will switch off automatically when the water
reaches the set temperature.
• The product features a safety switch that shuts it down if
it boils dry. If this should occur, remove it from the base
and wait until it cools down before using it again. NOTE:
The kettle should ONLY be used with the base provided.
Burn Hazard! Do not overfill kettle:
• Water might enter the steam tube and leak from the
bottom of the product
• Boiling water might spill out of the spout.
• Regular cleaning will prolong the lifespan of the product.
• Always unplug from the plug socket and allow to cool
down before cleaning. Do not immerse any part of the
product in water or other liquid.
• It is normal for stainless steel to discolor.
• Do not use chemical or abrasive agents (or tools) to
clean the outside of the product. These may damage
the outside surface.
• Fill the product up to the MAX mark with a half water,
half white vinegar solution and let it sit for over 1 hour to
descale.
• Pour the solution out of the product. Wipe off the
residues (if any) with a damp cloth.
• Fill the product with clean water, bring to boil and then
discard the water.
• To clean the kettle thoroughly, it may be necessary to
repeat the cleaning process above several times.
• Wipe the outside surface with a damp cloth and then
wipe dry with a soft cloth.
• Any other servicing should be performed by an
authorized service representative.
U
S
IN
G
T
H
E
K
E
T
T
L
E