Onnet technologies konnect plus, Manual, Page: 28 / 42

28
Server Name: this field allows you change the server name
change it whatever you want
USE DHCP: when this field is checked, your server acquires IP
address automatically. Uncheck it and you can enter IP
address automatically
NOTE: you can apply this function to a server under different
network segment. HOWEVER some router/switch hub does
not allow communication between servers under different
segment. In this case, you won't even see the server on a
different network segment.
Backup Firmware: this function is a fail-server mechanism for
the update Firmware function. Just browse to where you want
to save the backup file and click on save to save the file.
Update firmware: update firmware with this function. Use the browse button to chose
the firmware to update. Click on open to start.
Change Password: simply enter the new password and enter it again for confirmation.
Click on submit to change.
Restart Server: this button reboots the server. Please note that function will not work if
the server. You attempt to reset has a device connected to it and the device is occupied by
a user.