10
FM Radio
Adjust the position of the FM wire antenna to adjust radio reception.
1. Press the
Power
button to turn the unit on.
2. Press the
Source
button to switch to
FM Radio Mode�
3. Press and hold the
Skip/Tune
buttons to scan FM frequencies. Press the
Skip/Tune
buttons to fine tune the
frequency adjustment.
Programming Radio Stations
1. With the speaker on and in FM Mode, press and hold the
Program/Prog
button on the unit or the remote. The
display will start blinking a preset number (Ex: P01).
2. Use the
Skip/Tune
buttons to select a preset number you wish to save, then press the
Program/Prog
button
again to save the frequency to that preset number. Up to 20 stations may be preset.
3. To select different presets, press the
Program/Prog
button, then use the
Skip/Tune
buttons to select a preset.
Programming a CD
1. While playing a CD, press the
Stop
button.
2. Press the
Program/Prog
button on the unit or the remote.
3. Press the
Skip/Search
buttons to select a track from the loaded CD to play first.
4. Press the
Program/Prog
button again.
5. Repeat steps 3 and 4 to program tracks from the loaded CD to play in the order they are selected.
6. Press the
Play/Pause
button to begin playing the programmed CD.
7. Press the
Stop
button twice to cancel the program.
CD & Radio
Loading & Playing a CD
Note: This unit is not compatible with MP3 CDs.
1. Press the
Source
button to switch to
CD Mode
radio mode.
2. Press the
Open
button to open the Disc Door.
3. Load a CD or CD-R/RW disc into the unit, label side facing toward you.
4. Close the Disc door.
5. Press the
Play/Pause
button to begin playing the loaded CD. Press the
Skip
buttons to cycle through different
tracks. Press and hold the
Skip
buttons to search through an audio track.
