10
The screw for the wall mount must be as below:
WARNING:
Troubleshooting
No picture
1. Check if the product is turned on.
2. Check if the power cord is connected to a wall outlet.
3. Check if there is a problem in the wall outlet by
connecting other products.
4. Check the signal source.
No color
1. Change the color system.
2. Adjust the saturation.
3. Try another channel. Black-white program may be
received.
Remote control does not work
1. Check if there are any obstacles between the
product and the remote control.
2. Replace the batteries
No picture, normal sound
1. Adjust the brightness and contrast.
Normal picture, no sound
1. Press the
Vol+
button to increase volume.
2. Volume is set to mute, press the mute button to
restore sound.
3. Change the sound system.
Unorderly ripples on the picture
It is usually caused by local interference, such as cars,
daylight lamps and hair driers. Adjust the antenna to
minimize the interference.
Snowy dots and interference
If the antenna is located in the fringe area of a television
signal where the signal is weak, the picture may be
marred by dots. When the signal is extremely weak,
it may be necessary to install a special antenna to
improve the reception.
1. Adjust the position and orientation of the indoor/outdoor
antenna.
2. Check the connection of antenna.
3. Try another channel.
Ignition
Black spots or horizontal streaks appear, or the picture
flutters or drifts. This is usually caused by interference
from car ignition system, neon lamps, electric drills, or
other electrical appliance.
Ghost
Ghosts are caused by the television signal following two
paths. One is the direct path, the other is reflected from
tall buildings, hills, or other objects. Changing the direction
or position of the antenna may improve the reception.
Radio frequency interference
This interference produces moving ripples or diagonal
streaks, and in some case, loss of contrast in the picture.
Find out and remove the radio interference source.
The TV turns off suddenly
1. Check that the power cord is not unplugged.
2. Check the power control settings
3. Check if the Sleep Timer feature is activated in
the Timer settings.
Stand
Put the column of the stands into the TV, align the
stands with the screw holes located on the TV.Secure
the stands to the TV with four (4) screws.
Note:
1)Illustrations below are provided for reference only
and may differ from actual product appearance.
2)
Below image shown here is indicative only. If there is
inconsistency between the image and the actual product,
the actual product shall govern.
Use a wall mount that supports a VESA
32inch(100mmx100mm),43inch(200mm x 100mm) pattern.
Follow the instructions that come with the wall mount.
Wall Mounting Your TV
Note: If these methods can not resolve the issue please
contact after-sales support to help resolve.
Chapter 3
For:32inch
(4) M4 x 8mm
no longer than 8mm
For:43inch
(4) M6 x 8mm
no longer than 8mm
