13
4
3
*
15
3. Insert two anchors
C3
(Fischer UX 10 x 60R - included in the Concrete Installation Kit
*
).
CAUTION:
Be sure the anchors are seated flush with the concrete surface.
4. Install wall plate
15
using two lag bolts
C1
. Tighten the lag bolts only until they are pulled firmly against the wall plate
15
.
CAUTION:
Avoid potential personal injury or property damage! All four lag bolts
C1
MUST BE firmly tightened to prevent unwanted
movement of the wall plate
15
. Ensure the wall plate
15
is securely fastened to the wall before continuing on to the next step.
NOTE:
If needed, you can make small level adjustments to the wall plate by loosening the bottom lag bolt
C1
and shifting the wall plate until level.
Tighten the bottom lag bolt
C1
when adjustments are complete.
*
Contact Customer Service at 877-689-1665 to have the Concrete Installation Kit shipped directly to you.
C1
C1
C3