10
Master Volume Feature
Master Volume Feature
The Master Volume Feature allows you to select
a single device (TV or audio receiver) that the
volume control always controls. For example,
the remote can be in TV mode while the volume
buttons control the volume on your audio receiver
instead of your TV.
Enabling the Master Volume Feature
1. Press and hold the
SETUP
button
until the red indicator stays on
(approximately 4 seconds) and then
release the button.
2. Press and release desired device
button (
TV, CBL, DVR, DVD, SAT,
AUDIO, AUX1, AUX2
) for the
device you wish to setup to control
the volume.
3. Press and release the
MUTE
button.
4. Press and release the
VOL +
button. The red indicator will blink
twice and then go off.
To test the feature put the remote in
another mode such as the TV mode
if you programmed the audio receiver
to be the Master Volume Device.
Point the remote at the audio receiver,
press and hold either the
VOL +
or
the
VOL -
button. If the audio receiver
volume changes then the remote is
programmed correctly. If the TV volume
changes and not the audio receiver,
you will have to repeat the steps above
and test again.
Disabling the Master Volume Feature
1. Press and hold the
SETUP
button
until the red indicator stays on
(approximately 2 seconds) and then
release the button.
SETUP
AUX1
MUTE
VOL
+
SETUP