determined by turning the equipment off and on,
the user is encouraged to try to correct the
interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the
equipment and receiver.
Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced
radio/TV technician for help.
3.The device has been evaluated to meet general
RF exposure requirement. The device can be used
in portable exposure condition without
restriction.
4. Rating Lable is located at the bottom of the
product.
1. Warning: Changes or modifications to this
unit not expressly approved by the party
responsible for compliance could void the
user’s authority to operate the equipment.
2. NOTE: This equipment has been tested and
found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses and can radiate
radio frequency energy and, if not installed and
used in accordance with the instructions, may
cause harmful interference to radio
communications.
However, there is no guarantee that interfer -
ence will not occur in a particular installation. If
this equipment does cause harmful interference
to radio or television reception, which can be
USER MANUAL INSERTS FOR FCC ID
Party sync mode compatible model list
AAABLU100006889
AAAGRY100006889
100008734
100008736
AAAGRY100006896
AAAGRY100006838
AAABLU100006839
AAAGRY100006839
AAAAQU100006839
AAAGRY100006897
AAAAQU100006897
AAAGRY100006902
80mm
80mm
USER MANUAL INSERTS FOR FCC ID
