6
• Do not allow anything to impact
the remote control.
• Do not spill water or any liquid on
the remote control.
• Do not place the remote control on
a wet object.
• Do not place the remote control
under direct sunlight or near
sources of excessive heat.
• Remove the battery from the
remote control when not in use for
a long period of time, as corrosion
or battery leakage may occur and
result in physical injury, and/or
property damage, and/or fire.
• Do not use any batteries other than
those specified.
• Do not mix new batteries with old
ones.
• Never recharge a battery unless it is
confirmed to be a rechargeable type.
Prepare the Remote Control
IMPORTANT:
The remote control will work within a 6m range, however this may be
impossible if there are obstacles between the unit and the control.
If the remote control is used near other devices which generate infrared rays
then it may not operate properly and may interfere with other devices.
Install/replace the batteries:
1 Press and slide the back cover to
open the battery compartment of
the remote control.
2 Insert two
AAA
size batteries
(included). Make sure the (
+
) and
(
–
) ends of the batteries match the
(+) and (–) ends indicated in the
battery compartment.
3 Close the battery compartment
cover.
1
2
3
Precautions Concerning Batteries
• Be sure to insert the batteries with
correct positive “
” and negative
“
” polarities.
• Use batteries of the same type.
Never use different types of batteries
together.
• Either rechargeable or non-
rechargeable batteries can be
used. Refer to the precautions on
their labels.
• Be aware of your fingernails when
removing the battery cover and the
battery.
• Do not drop the remote control.