Online USV 10000 3/1 XANTO S Series, User Manual

Page: 80 / 192

I N S T A L L A T I O N
80 / 192
XS20000_31_manual_ger_eng_it_V1.1.2.doc R. Kistler
2. Connect the internal battery module inserts (see Figure 9).
Figure 9: Connecting the internal battery module inserts
3. Reconnect the ribbon cable to the display of the front cover and
reinsert the front cover of the UPS system.
4. Proceed with section " Commissioning" .
3.6 Commissioning
NOTE
Make sure that the total nominal power of all connected devices
does not exceed the capacity of the UPS system.
1. If an optional battery module is being installed, make sure that
it is connected to the UPS system correctly (see Connecting the
external battery module ).
2. Connect the devices to be protected by the UPS system without
switching on the devices.
3. Switch the power supply on. Switch the input switches MAIN 1
and MAIN 2 on the rear side of the UPS system to the "ON"
position.
The LCD display on the front cover of the UPS system lights up
and displays the ONLINE logo.
XANTO S 10000 3/1 XANTO S 20000 3/1