TX-SR308/ 508 HT-R280/ 380/ 538/ 580/ HT-RC230
MAIN/DSP Update Procedure-1 (How to check
FW Version)
To check FW versions on Front Display,
D : 1 . 0 2 / 1 0 4 1 6 a 3 8
M : 1 . 0 7 / 1 0 4 1 3 A L
1.
While the unit is on, hold down [DISPLAY] and the press [ON/STANDBY].
Main FW Version
will be shown on Front Display.
2.
While Main FW Version is shown, press [+(TONE)].
DSP FW Version
will be shown on Front Display.
* It depends on the version.
* It depends on the version.
DISPLAY
+(TONE)
ON/STANDBY
Version Information
Main: 1.07/10413AL
DSP: 1.02/10419a38
OSD: 1.01/10204A0
CHECKSUM: 27D3879D
OSD FW Version will not be shown on Front Display.
To check FW Versions on the monitor,
While the unit is on, hold down [DISPLAY] and the press [ON/STANDBY].
FW Versions
of Main/DSP/OSD will be shown on the monitor like below.
[NOTE] FW version combination
* OSD FW cannot be updated.
* Combination of "OSD_FW and Main_FW" has limitation
.
*
Do not use combination except the list.
OSD menu will not appear. Before FW UPdate. check the versions of FWs.
* To upgrade OSD FW version,
Replace Q8105 SPI_MEMORY "EN25Q32A-100HIP" or HDMI Board.
Main
DSP
OSD
1.04
1.00
1.00
1.05
1.06
1.07
1.08
1.09
1.01
1.01
FW Version Combination ”As of September, 2010”
1st Lot
Later Lots
e.g.
e.g.
1.02
marking
NO
A
B
C
D
E
marking is the S/N end
