WiFi 5GHz Setting
5
4
3
2
1
6
D
C
A
B
D
C
A
B
5
4
3
2
1
6
COMMON
Wireless LAN 5GHz Setting
IMPORTANT!!
Back Ground:
It is totally different from Radio Law at the each country on 5GHz band.
It means it is totally different from enabled Channel of 5GHz band at the each country.
We define the “
Country Code
” for 5GHz band.
You must set up the appropriate country code to the product
.
Example;
Case1:
When you use the “P” destination products and bring move to Russia or Israel,
If you did not setup change country code and use in Russia and Israel,
You will be on the illegal Radio Law in Russia and Israel.
Case2;
When you use “C” or “D” destination product bring move to Japan or Taiwan,
If you did not setup change country code and use in Japan and Taiwan,
You will be on the illegal Radio Law in Japan and Taiwan.
Service Parts information:
The default country code is set on “Processing Circuit Board(PRC board)”.
You must make sure and set up the
“
Country Code
“
when you replace the processing
circuit pc board.
Otherwise You and your customer should be on the illegal Radio Law and
IT HAS POSSIBILITY TO HAVE A RISK OF
PUNISHMENT FROM EACH COUNTRY GOVERNMENT
.
If you did not make sure country code and no setup code and face any trouble,
We does not have any responsibility.
For setting up the
Country Code
,
Please ask the procedure of changing country code
to your distributer or our sales
.
It is no described the procedure of changing
Country Code
on this Service Manual
If you have any trouble of unclear procedure for update country code,
Please contact our sales department.
PRC Board Default Value of Country Code
The PRC board is already set default Country Code by the representative destination.
To confirm the default country code, Please refer to the
"How to read PRC Board part
number and Default value of Country Code"
section.
Figure Country List (need to set up)
