
TX-NR901
FRONT PANEL
POWER switch
American and Australian models don’ t have this
switch.
This is the main power switch. When set to OFF, the
TX-NR901 is completely shutdown. When set to
ON, the TX-NR901 is in Standby mode and the
STANDBY indicator lights up.
Don’t turn on the power until you’ve completed,
and double checked all connections.
STANDBY/ON button
This button is used to set the TX-NR901 to On or
Standby . For models with a POWER switch, this
button has no ef fect unless the POWER switch is set
to ON.
STANDBY indicator
This indicator lights up when the TX-NR901 is in
Standby mode, and it ashes while a signal is being
received from the remote controller .
AUDIO SELECTOR button
This button is used to select the audio input signal
format: analog, digital, or multichannel.
Input selector buttons & indicators
These buttons are used to select the following input
sources: DVD, VIDEO 1–5, TAPE, TUNER,
PHONO, CD, and NET AUDIO. The indicators
show the currently selected input source.
The indicators also show which input source is
selected for Zone 2, in which case they light up
green, or which input source is selected for record-
ing (REC OUT), in which case they light up red.
Display
See “Display” on next page.
Remote-control sensor
This sensor receives control signals from the remote
controller.
DISPLAY button
This button is used to display various information
about the currently selected input source.
MASTER VOLUME control
This control is used to set the volume of the
TX-NR901 from 0 to 100.
DIRECT/PURE AUDIO button
This button is used to select the Direct or Pure
Audio listening modes.
PURE AUDIO indicator
This indicator lights up when the Pure Audio listen-
ing mode is selected.
UPSAMPLING indicator
This indicator lights up when the Upsampling func-
tion is on.
PHONES jack
This 1/4-inch phone jack is for connecting a stan-
dard pair of stereo headphones for private listening.
ZONE 2 LEVEL [
] [
] buttons
These buttons are used to set the volume for Zone 2.
REC OUT button
This button is used to select the input source that
you want to record via the REC OUTs (i.e., TAPE
OUT, VIDEO 1 OUT, VIDEO 2 OUT).
ZONE 2 button
This button is used to select the input source for
Zone 2.
OFF button
This button is used to turn of f the REC OUTs (i.e.,
TAPE OUT, VIDEO 1 OUT, VIDEO 2 OUT) or
Zone 2.
STEREO button
This button is used to select the Stereo listening
mode.
SURROUND button
This button is used to select the Dolby and DTS lis-
tening modes.
THX button
This button is used to select the THX listening
modes.
DSP [
] [
] buttons
These buttons are used to select the DSP (digital
signal processor) listening modes.
DIMMER button
This button is used to adjust the display brightness.
MEMORY button
This button is used when storing and deleting radio
presets.
FM MODE button
This button is used to select the FM radio Auto and
Mono modes.
SETUP button
This button is used to access the onscreen setup
menus (OSD) that appear on the TV .
TUNING [
] [
] buttons
These buttons are used to tune into radio stations
and to select items on the onscreen setup menus
(OSD).
ENTER button
This button is used when navigating the onscreen
setup menus (OSD), entering names, and confirm-
ing settings.
PRESET [
] [
] buttons
These buttons are used to select radio presets and to
select items on the onscreen setup menus (OSD).
4
6
7
12
11
13
16
19
21
5
8
9
10
15
14
17
18
20
3
26
23
22
25
24
1
2
27
28