background image

12

Step 3:

 Playing Back

Connecting and playing the Bluetooth-
enabled device

You can wirelessly enjoy music files stored in a smartphone 

or other Bluetooth-enabled device. The coverage area is 48 

feet (15 meters).

• 

The Bluetooth-enabled device needs to support the 

A2DP profile.

• 

Note that connection is not always guaranteed with all 

Bluetooth-enabled devices.

Pairing

Pairing is necessary when using the Bluetooth-enabled 

device for the first time. Before starting the procedure, learn 

how to enable the Bluetooth setting function and to connect 

with other devices on the Bluetooth-enabled device.

1. 

Press BLUETOOTH on the remote controller.

The unit enters the pairing mode and the BLUETOOTH 

indicator starts flashing.

2. 

While the BLUETOOTH indicator is flashing, 

complete connection on the Bluetooth-enabled 

device in the nearby area within about 2 minutes.

If the name of this unit is displayed on the Bluetooth-

enabled device's display, select this unit. Paring will be 

completed after a short time.

• 

If a password is requested, enter "0000".

• 

When connecting the unit to any other Bluetooth-

enabled device, start pairing by holding down 

BLUETOOTH until the BLUETOOTH indicator starts 

flashing. This unit can store the data of up to ten 

paired devices.

Playing Sound of the Bluetooth-enabled Device

If the unit is on and the Bluetooth-enabled device is 

connected, the input will be automatically switched to 

BLUETOOTH. Play music in this state.

• 

It may take about a minute until connection is established 

when the unit is on since the Bluetooth function takes 

some time to start up.

• 

If the volume setting on the Bluetooth-enabled device is 

low, the sound will not be output from this unit.

• 

Due to the characteristics of Bluetooth wireless 

technology, the sound produced on this unit may slightly 

be behind the sound played on the Bluetooth-enabled 

device.

Using the Home menu

In the Home menu, you can make advanced setup and 

use Internet radio and DLNA function. For details on the 

operation, see the Advanced Manual (http://www.onkyo.

com/manual/txnr838/adv/en.html).

1. 

After pressing RCV, press HOME on the remote 

controller.

The Home menu is displayed on the TV screen. You can 

also use the HOME button on the main unit.

Setup

HOME

2. 

Select the item with the cursor buttons of the 

remote controller and press ENTER to confirm your 

selection.

To return to the previous screen, press RETURN. To 

return to the Home menu, press HOME.

 Sleep Timer

: Select to turn the unit into standby mode 

automatically when the specified time elapses.

 InstaPrevue

: Select to preview videos input from the 

HDMI input jacks collectively in a single screen. The screen 

has a main window (current input video) and sub windows 

(other input videos). To switch the current input, select the 

desired sub window with the cursor buttons and press 

ENTER.

• 

A black sub window is shown for the input with no video 

signals.

• 

"InstaPrevue" cannot be selected if the video is being 

input from HDMI IN 5 or 6 or if there is no signal from the 

input currently selected.

• 

Depending on video signals, the picture may not be 

properly rendered on the preview thumbnails.

• 

1080p or higher resolution is not supported.

 Setup

: You can change the assignment of input 

terminals and input selector buttons and also make various 

speaker settings and other advanced settings.

 Network Service

: Select to use Internet radio services 

and the DLNA function. When you connect the unit to the 

network and press ENTER, the network service screen will 

be displayed on the TV. On the TV screen, select the desired 

service or music file with the cursors of the remote controller 

and press ENTER to confirm and start playback.

Internet radio service

: You can listen to TuneIn or such 

other Internet radio stations registered in advance. 

DLNA 

: You can play music files stored in the PC or 

NAS device connected to the network. Select the server 

with the cursors, select the desired music file and press 

ENTER to start playback.

Home Media

: You can play music files in a shared folder 

on the PC or NAS device connected to the network. 

Select the server with the cursors, select the desired 

music file and press ENTER to start playback.

• 

"Network Service" becomes selectable after the network 

starts up even if it cannot be selected first. It may take 

about a minute to start up.

• 

When "Network Service" is selected for the first time, 

the "DISCLAIMER" screen will appear on the TV. Select 

"Agree" if you agree the content. If you do not agree the 

content, you cannot use the network service.

¼

¼

You cannot use the function unless the TV is connected via HDMI 
since selecting "Agree" in the "DISCLAIMER" screen is not possible.

• 

Layout of the icons in the "Network Service" top menu 

can be changed. Press NET on the remote controller 

and press D. Select the source icon with the cursors and 

press ENTER, and then select the destination icon and 

press ENTER. The positions of the icons are switched 

each other.

 USB

: Select "USB" in the TV screen and connect a 

USB storage device to the USB port on the front panel. On 

the TV screen, select the desired folder or music file with 

the cursors of the remote controller and press ENTER to 

confirm and start playback.

• 

"USB" becomes selectable after the USB function starts 

up even if it cannot be selected first. It may take about a 

minute to start up.

Summary of Contents for TX-NR838

























Reviews: