58
En
Tuner
For AM/FM tuning to work properly, you must specify the
AM/FM frequency step used in your area. Note that when
this setting is changed, all radio presets will be deleted.
■
AM/FM Frequency Step (North American and
Taiwan models)
`
10kHz/200kHz:
`
9kHz/50kHz:
Select the frequency step according to your area.
■
AM Frequency Step (European, Australian and
Asian models)
`
10kHz:
`
9kHz:
Select the frequency step according to your area.
HDMI
■
HDMI Control(RIHD)
`
Off
`
On
Turn this setting on to allow
p
-compatible
components connected via HDMI to be controlled by the
AV receiver (
➔
page 86
).
Note
• When the setting is set to “
On
” and the menu is closed, the
names of connected
p
-compatible components and
“
RIHD On
” are displayed on the AV receiver.
“
Search…
”
→
“
(name)
”
→
“
RIHD On
”
When the AV receiver cannot receive the name of the
component, it is displayed as “
Player
*
” or “
Recorder
*
”, etc (“
*
”
shows up and indicates the number of components, when two or
more are received).
• When an
p
-compatible component is connected to the
AV receiver via an HDMI cable, the name of the connected
component is displayed on the AV receiver display. For
example, while you are watching TV broadcasting, if you
operate a Blu-ray Disc/DVD player (being powered on) with the
remote control of the AV receiver, the name of the Blu-ray
Disc/DVD player will be displayed on the AV receiver.
• Set it to
“
Off
” when a connected piece of equipment is not
compatible or it is unclear whether the equipment is compatible
or not.
• If operation is not normal when set to
“
On
”, change the setting
to
“
Off
”.
• Refer to the connected component’s instruction manual for
details.
• When “
HDMI Control(RIHD)
” setting is set to “
On
”, the
power consumption on standby mode slightly increases.
(Depending on the TV status, the AV receiver will enter standby
mode as usual.)
• The
p
control does not support
HDMI OUT SUB
. Use
HDMI OUT MAIN
instead.
• When the source equipment is connected with the
u
connection, it may malfunction if “
HDMI Control(RIHD)
” is
set to “
On
”.
■
HDMI Through
`
Off
`
Auto
:
Detects the signal and automatically selects the input
source.
`
BD/DVD
,
VCR/DVR
,
CBL/SAT
,
GAME
,
PC
,
AUX
,
TV/CD
,
PHONO
,
PORT
:
Selects the input source for which the HDMI
Through function is enabled.
`
Last
:
The HDMI Through function is activated on the
input source selected at the time of setting the AV
receiver to standby mode.
When enabling the HDMI Through function, regardless of
whether the AV receiver is on or in standby, both audio
and video streams from an HDMI input will be output to
the TV or other components via HDMI connection. The
HDMI THRU
and
HDMI
indicators light when enabled
(
HDMI
is dimly-lit).
This setting is set to “
Auto
” automatically when the above
“
HDMI Control(RIHD)
” is set to “
On
”.
Note
• Only the input source assigned to the
HDMI IN
via “
HDMI
Input
” is enabled (
➔
page 44
).
• The power consumption during standby mode will increase
during the HDMI Through function: however in the following
cases, the power consumption can be saved:
– The TV is in standby mode.
– You are watching a TV program.
• Refer to the connected component’s instruction manual for
details.
• Depending on the connected component, the correct input source
may not be selected with the setting set to “
Auto
”.
• This setting is set to “
Off
” automatically when the “
HDMI
Control(RIHD)
” setting is set to “
Off
”.
