![background image](http://html.mh-extra.com/html/onkyo/tx-nr616/tx-nr616_service-manual_1637353018.webp)
TX-NR515/515AE/616/616AE/ HT-RC460/470/ HT-R791/ DTR-20.4/30.4
OPERATION CHECK-2
1.OPERATION CHECK(2/2)
1-9. CONFIRMATION OF OSD(ON SCREEN DISPLAY) OPERATION
a. When SETUP button is pushed, confirm that setup menu is displayed in HDMI Out.
b. Confirm that specified operations for ENTER(with 4-cursor) buttons are made.
1-10. CONFIRMATION OF HDMI AUDIO OPERATION.
CONFIRMATION OF HDMI I2S SIGNAL
See “OPERATION CHECK-3,-6” for TEST MODE operation.
a. Input the one of these signals below from HDMI1 terminal.
DTS-HD MasterAudio 7.1ch
Dolby TrueHD 7.1ch
LPCM 7.1ch
b. Change the state to TEST 6-00. Confirm the signal is output from L/R,SW/C,SL/SR,SBL/SBR.
c. When TEST 6-08, confirm the sound(HDMI1 input) outputs from the TV.
CONFIRMATION OF HDMI SPDIF SIGNAL
d. SPDIF signal is input from HDMI terminal.
e. When TEST 6-06, confirm the sound
(
HDMI IN1)outputs from the speaker.
f. When TEST 6-07, confirm the sound(BD/DVD analog input) outputs from the TV.(VIDEO is HDMI1)
CONFIRMATION OF HDMI DSD SIGNAL.
g. When TEST 6-10 confirm the sound of DSD 5.1ch input HDMI IN 3, output from the speaker.
1-11. VIDEO FUNCTION CHECK
See “OPERATION CHECK-3,-6” for TEST MODE operation.
a. Confirm Video output signal as shown Table 2, while Video signal are input as shown Table 1.
NOTE 1: Confirm the HDMI path at 1080p signal.
NOTE 2: Confirm the TEST5-08(COMPONENT--->HDMI) path at 480i signal.
Table 1
Input
BD/DVD
CBL/SAT
STB/DVR
GAME
PC
IN6
IN7
AUX
USB
Composite Video
A
B
C
D
---
---
---
E
E
Component
IN1
IN2
---
---
---
---
---
---
---
F
G
No
No
No
No
No
No
No
HDMI
IN1
IN2
IN3
IN4
IN5
IN6
IN7
AUX
---
H
J
K
L
M
N
O
P
---
Test mode
5-00(BD/DVD)
5-01(CBL/SAT)
5-02(STB/DVR)
5-03(GAME)
5-04(PC)
5-05(AUX IN6)
5-06(IN6 IN7)
5-07(IN7 AUX)
5-08(BD/DVD)
5-09(USB/AUX)
Composite Video
Monitor out
A
B
C
D
---
---
---
---
A
E
Component
OUT
F
G
---
---
---
---
---
---
F
---
HDMI
Main
H
J
K
L
M
N
O
P
F
E
Table 2
b. OPERATIONS OF VIDEO SIGNAL-DETECTION
Set the TEST MODE to "TEST 5-00".
When the component video signal is input to IN1, confirm that "RDS" of FL TUBE lights.
1-12. CONFIRMATION OF 12V TRIGGER OPERATIONS.(DTR-20.4/30.4 ONLY)
a. After checking that there is no output from 12V TRIGGER A terminal,it checks that
there is an output of 12V±10%/150mA after switched the "TEST2-11".
b. After checking that there is no output from 12V TRIGGER B terminal,it checks that
there is an output of 12V±10%/25mA after about 1 seconds switched the "TEST2-12".
c. After checking that there is no output from 12V TRIGGER C terminal,it checks that
there is an output of 12V±10%/25mA after 2 seconds switched the "TEST2-13".
Sub
H
J
K
L
M
N
O
P
F
E
1-13. CONFIRMATION OF COOLING FAN OPERATION (TX-NR616/HT-RC470/DTR-30.4 only)
See “OPERATION CHECK-3,-5” for TEST MODE operation.
a. Confirm to fan no rotate
b. When TEST 4-36 or TEST 4-37, confirm to fan rotate.
1-14. MISCELLANEOUS
a. Please confirm LED and FL displaying by the FL test mode.
And confirm the destination setting. ---> See to “OPERATION CHECK-3”
b. Confirm the version of each firmware.---> See to “SERVICE PROCEDURE-2”
c. Confirm the Firmware Combination Check.---> See to “OPERATION CHECK-3”
d. Please confirm the Check Sum.---> See to “OPERATION CHECK-3”