TX-NR717/818/1010/3010/5010
DEBUG MODE-1
AUDIO DEBUG MODE-1/4
To set in Debug mode
1. Press and hold down
DISPLAY
button, then press
ON/STANDBY
button.
The version number of microprocessor is displayed
only for 3 seconds.
The version number of DSP is displayed
only for 3 seconds.
AUDIO DEBUG MODE (Display mode of the audio information)
The operations of DSP and DIR etc are able to checked by the information displayed on FL in this debug mode.
This information will help to analysing digital audio no sound trouble.
Audio dubug mode
Step-1
Exit
e.g.
TX-NR717
TX-NR818/1010/3010/5010
ON/STANDBY
+ (TONE)
DISPLAY
ON/STANDBY
+ (TONE) DISPLAY
Main:
1.02/12611AH
2. Press
+
(
TONE)
button while the version number of microprocessor is displayed.
3. Press
DISPLAY
button while the version number of DSP is displayed.
DSP 1st/NET:
1.02/12608AHA
e.g.
0A0002: : 00
ANA: o: NON: :
4. Press
DISPLAY
button.
SP00F
*
00F00409
48 48256STB
2: o: PCM : PCM
00: x: F: OFF
1: ANA 048k048k
2/ 0. 0: 2. 0: 3/4
9. Press
DISPLAY
button.
8. Press
DISPLAY
button.
6. Press
DISPLAY
button.
5. Press
DISPLAY
button.
11. Press
DISPLAY
button.
12. Press
DISPLAY
button.
10. Press
DISPLAY
button.
7. Press
DISPLAY
button.
13. Press
DISPLAY
button.
LW : 0 0
RW : 0 0
LB : 0 0
RB : 0 0
LH : 0 0
RH : 0 0
LS : 0 0
RS : 0 0
C : 0 0
L : 0 0
R : 0 0
SW : 0 0
SW2 : 0 0
Step-2
Step-11
Step-10
Step-9
Step-8
Step-7
Step-6
Step-5
Step-4
Step-3
14. Press
DISPLAY
button.
e.g.
e.g.
e.g.
e.g.
e.g.
e.g.
e.g.
e.g.
e.g.
e.g.
e.g.
