Onkyo TX-L50 Instruction Manual Download Page 29

Page: 29 / 81

> Before Start

> Part Names

> Install

> Initial Setup

> Playback

Supplementary Information | Advanced Setup | Others

BLUETOOTH

Playback

Pairing

Playing Back

Pairing

1. When you press the

button on the remote controller,

"Now Pairing..." is displayed on this unit's display, and the
pairing mode is enabled.

2. Enable (turn on) the BLUETOOTH function of the

BLUETOOTH enabled device, then select this unit from
amongst the devices displayed. If a password is
requested, enter "0000".

To connect another BLUETOOTH enabled device, press
and hold the

button until "Now Pairing..." is displayed,

then perform step 2 above. This unit can store the data of
up to eight paired devices.

The coverage area is 15 meters (48 feet). Note that
connection is not always guaranteed with all
BLUETOOTH enabled devices.

Playing Back

1. When the unit is on, perform the connection procedure

on the BLUETOOTH enabled device.

2. The input selector on this unit automatically switches to

"BLUETOOTH".

3. Play the music files. Increase the volume of the

BLUETOOTH enabled device to an appropriate level.

Due to the characteristics of BLUETOOTH wireless
technology, the sound produced on this unit may slightly
be behind the sound played on the BLUETOOTH
enabled device.

Onkyo TX-L50 XXX

Summary of Contents for TX-L50


















































































Search results

Summary of Contents for TX-L50

Reviews:

Related manuals for TX-L50

Brands by name

Popular brands

Onkyo TX-L50, Instruction Manual

Search results

Summary of Contents for TX-L50

Reviews:

Related manuals for TX-L50

Brands by name

Popular brands