Onkyo TX-8250, Instruction Manual

Page: 13 / 132

13 En
Initial Setup
Initial Setup with Auto Start-up Wizard
Starting up : When you press Í , "Now Initializing..." is
displayed on the display. After this, when "Now
Initializing..." goes out, you can start operating the unit.
Wi-Fi connection settings
When you first turn the power on, the Network Setup
display is displayed automatically, allowing you to easily
make Wi-Fi connection settings.
To set, select the item with the cursors on the remote
controller and press ENTER to confirm.
0
To return to the previous display, press RETURN.
1. Press ENTER when "Network Setup" is displayed.
2. To make Wi-Fi settings, select "Wi-Fi". If you have
connected with an ethernet cable, select "Wired(Exit)"
with Up/Down on the remote controller and press
ENTER.
3. If you selected "Wi-Fi", select the setting method with Up/
> Before Start > Part Names > Install > Initial Setup > Playback
Supplementary information | Advanced Setup | Others
Network Setup
1 2
Network Setup
Wi-Fi
Wired ( Exit )
SN29403234_TX-8250_En.book 13 ページ ２０１７年７月１９日 水曜日 午後１時０分