manualshive.com logo in svg

Onkyo TX-8050, Instruction Manual

Share
Download
Onkyo TX-8050 Instruction Manual Download Page 17

En-

17

Connecting Your Components

—Continued

See “Recording” for an explanation of recording (

page 22).

Notes:

• The receiver must be turned on for recording. 

Recording is not possible while it’s in Standby mode.

• If you want to record directly from your TV or 

playback VCR to the recording VCR without going 
through the receiver, connect the TV/VCR’s audio and 
video outputs directly to the recording VCR’s audio 
and video inputs. See the manuals supplied with your 
TV and VCR for details.

• Video signals connected to composite video inputs 

can be recorded only via composite video outputs. If 
your TV/VCR is connected to a composite video 
input, the recording VCR must be connected to a 
composite video output.

• Copy-protected Blu-ray discs and DVDs cannot be 

recorded.

• Sources connected to a digital input cannot be 

recorded. Only analog inputs can be recorded.

• DTS signals will be recorded as noise, so don’t 

attempt analog recording of DTS CDs or LDs.

• If Pure Audio is turned on, no video signal is output 

from the receiver. If you want to make recordings, 
select another listening mode.

Connect the receiver’s power cord to a suitable wall outlet.

Notes:
• Before connecting the power cord, connect all of your speakers and AV components.

• Turning on the receiver may cause a momentary power surge that might interfere with other electrical equipment on 

the same circuit. If this is a problem, plug the receiver into a different branch circuit.

Connecting a Recording Component

VCR, DVD recorder, etc.

Cassette tape 
deck, CDR, etc.

Analog 
audio cable

Analog 
audio cable

Composite video 
cable

Connecting the Power Cord

Summary of Contents for TX-8050














































































Reviews:

No comments

Brands by name

Popular brands

Load more brands