Onkyo Sharp GX-BT480, Operation Manual

Page: 6 / 12

E-5
Bluetooth
Pairing
Power on the unit and it will enter the Bluetooth mode.
The blue indicator will flash.
On your smartphone search Bluetooth devices list for
“GX-BT480 SHARP”.
Once connected the speaker will announce it is
“connected” and the blue indicator will cease flashing.
Music
Press to play/pause
Press to skip up a track.
Press to go to the beginning of the current track.
Press twice to skip down a track.
Calls
SIRI/GOOGLE
Press to answer an incoming call.
Press to end the active call
Press twice or long press to reject an incoming
call.
Press twice to activate or cancel Siri/Google
voice dialing.
Disconnect
Press and hold until a voice prompt
“disconnected” is heard.
This will disconnect the current Bluetooth
connection.
Other Bluetooth device can now find and pair
with this unit.
General control
To turn the power on or off
Volume control
Press the or button to increase or decrease the
volume.
Equalizer
Press the button repeatedly to select desired sound.
The default equalizer is Standard. This is for
use when the music is already in very heavy
Bass and you need to pull it back a bit.
Standard EQ is the loudest option.
Bass Boost EQ will enhance the level of
bass.
Movie EQ enables the use of this unit as a
soundbar with low latency playback and the
ability to hear the dialogue and all the action
without compromise.
Standard :
Bass Boost :
Movie :
Mode
Press the button repeatedly to select desired mode.
Note:
To select Micro SD card mode, insert a Micro SD card into
the Micro SD card slot.
Bluetooth Aux In SD card
Notes :
Each time this unit powers on, it will reset to default
volume.
(For Bluetooth and Micro SD card function only)
After 10 minutes with no activity or connection this unit
will automatically power off to conserve battery.
Press the button to turn the power on or off.
When turning on, battery indicator will light up and a
sound tone will be heard.
When turning off, a voice message “Powering down” will
be heard.