En-
12
Playing Back via Bluetooth
Downloading the App
We have developed an App to give you full control from your iPad/
iPhone/iPod touch while playing audio over the Bluetooth wireless
connection, please download the App for FREE.
Supported OS version: 4.0 or higher
After you build a Bluetooth connection between your iPad/iPhone/
iPod touch and the SBX-200, a prompt will be displayed on your
iPad/iPhone/iPod touch.
If you would like to install our App, please install the App in
accordance with the contents displayed on the screen.
When the installation is fi nished, you can control the playback from
your iPad/iPhone/iPod touch.
Listening to an audio from Bluetooth device
NOTE
If your mobile phone supports A2DP protocol, its music will play
through the unit.
You can build a Bluetooth connection with a mobile phone, an
iPod or any other Bluetooth-enabled devices.
1
Press the “
” button to turn on the unit.
2
Press the INPUT button to switch to Bluetooth mode.
The source indicator turns to blue.
3
Press the PAIRING button on the unit to put the unit into the
pairing mode.
The pair indicator starts blinking at a fast rate.
If you hold the PAIRING button for more than 2 seconds during
the process of pairing, the operation will be cancelled.
PAIRING
button
4
During this period, you can operate the mobile phone, iPod
or Bluetooth-enabled device to pair with the unit within a
10m range.
For details on the Bluetooth connection, refer to the user
manual of the Bluetooth-enabled device.
The unit may not work as normal depending on the
circumstance even though the unit is placed within the 10 m
range. In such cases, get the Bluetooth-enabled device closer
to the unit and retry the operation.
5
Once the unit is detected and its name “SBX-200” appears on
the display of your Bluetooth-enabled device, select the
“SBX-200.” If a prompt requests a password, key in the “1234”.
The pair indicator starts blinking quickly to indicate that the
unit and your device have put into the connection mode.
When a Bluetooth connection is established successfully, the
indicator will be solid on.
6
Select the desired music and press “
” button on your
device. The unit automatically starts playing the audio.
Try again above steps 2 to 5 if the pair indicator turns solid
after blinking for 2 minutes, the pair was unsuccessful.
