![background image](http://html1.mh-extra.com/html/onkyo/pr-rz5100/pr-rz5100_basic-manual_1636834032.webp)
32
> Before start > Hookup > Setup > Playback
Rear Panel
1. COMPONENT VIDEO IN/OUT jacks: Transfer the video
signals of an AV component with a component video cable.
2. ZONE 2/ZONE 3 PRE/LINE OUT jacks: Output audio
signals with an analog audio cable to a pre-main
amplifier or a power amplifier in a separate room (ZONE
2/ZONE 3). (
3. HDMI IN jacks: Transmit video signals and audio signals
with a HDMI cable connected to an AV component.
4. VIDEO IN jacks: Input the video signals from AV
components with an analog video cable.
5. AUDIO IN jacks: Input TV or AV component audio
signals with an analog audio cable.
6. GND terminal: The ground wire of the turntable is connected.
7. HDMI OUT jacks: Transmit video signals and audio
signals with a HDMI cable connected to a monitor such
as a TV or projector.
8. ETHERNET port: Connect to the network with an
Ethernet cable.
9. USB port: A USB storage device is connected so that music
files stored in it can be played. You can also supply power
(maximum 5V/1A) to USB devices with a USB cable.
10.DIGITAL IN OPTICAL/COAXIAL jacks: Input the digital
audio signals from TV or AV components with a digital
optical cable or digital coaxial cable.
11. Wireless antenna: Used upright for Wi-Fi connection or
when using a BLUETOOTH enabled device. The
diagram shows the movable range for the wireless
antenna. Do not try to force it beyond this range
otherwise you may break it.
12.AC INLET: The supplied power cord is connected.
13.RS232 port: For connection to the home control system.
14.12V TRIGGER OUT jacks: Allows you to connect a
device with 12V trigger input jack to enable link operation
between the device and the unit.
15.IR IN port: Allows you to connect a multiroom remote
control kit.
16.TUNER AM/FM 75Ω terminal: The supplied antennas
are connected.
17.PRE OUT (XLR) jacks: Use a balanced XLR cable to
connect the power amplifier or powered subwoofer. Up to
two powered subwoofers can be connected.
18.PRE OUT (RCA) jacks: Use an analog audio cable or
subwoofer cable to connect the power amplifier or
powered subwoofer. Up to two powered subwoofers can
be connected.
1
4
5
7
3
2
6
8
18
9
10
12
11
13
17
15
16
14
11