12
En
Connecting the Speaker Cables
The following illustration shows which speaker should be connected to each pair of terminals. If you’re using only one
surround back speaker, connect it to the
SURR BACK L
terminal.
Note
• If you use front high or front wide speakers, you must turn on the AV controller and select the speakers to be used.
For more details, see the instruction manual of the connected component.
1
Strip about 1/2" to 5/8" (12
to 15 mm) of insulation from
the ends of the speaker
cables, and twist the bare
wires tightly, as shown.
2
Unscrew the terminal.
1/2" to 5/8"
(12 to 15 mm)
3
Fully insert the bare wires.
4
Screw the terminal tight.
Surround
back right
Surround
right
Front right
Center
Front left
Surround
left
Surround
back left
Front
high/wide
left
Front
high/wide
right
Select
4
Ω
or
6
Ω.
The amplifier
